TTT Ep3 – How To Have More Control Of Your Dent Repair Bar
A Simply Solution For More Control Of Your Dent Repair Bar
This week's top tip is using tape over the end of your dent repair bar.
This will allow for a much softer push and give you a bit more control. This is particularly good in removing lighter dents or just if you're training, to give you that softer push to ensure you are not putting high spots in the panel or there is a risk of cracking the paint.
A Quick, But Simple Solution, But A Quick Fix
So I will tear off a small section of the tape and just wrap it round the end of the dent repair bar. That will give a much softer or more resistance to give a much softer push.
Of course you can add three or four or multiple layers on the tape just to give you that damper.
Learn more about Paintless Dent Removal! Join our exclusive PDR community!