​Vehicles are used obviously daily and they can get quite dirty and grubby. Sometimes, attempts to remove the dents is possible but the panel can be full of dust and it just takes the shine off. So it is important that before starting to work on the dent make sure you have a nice clean image. If we're using like a line reflector board and the recommendation is just to grab yourself some cloth to polish and buff that panel up get to get it as shiny as possible

​​That will surely give you a nice clean crisp image to work with via dent repair. Really buff up the panel to get that nice shine and really make sure you can seal on the detail. That is going to give you that dent out 100% and keep your customers really happy!

For more tips and techniques join the growing PDR community! Be a member!